TheraTouch DX2 Diathermy Device

• Anatomical Treatment Guide for easy monode placement

• Save up to 99 user-defined favorites

• 9 evidence-based Quick Links by Indication

• Qualitative Thermal Dosimetry with six settings included

• Easy to use, touch-screen interface

• USB port for easy software upgrades

• Dual treatment indicators on unit and inductive drum

• 3 year warranty

SCIENTIFIC DOSAGE CONTROL

With the TheraTouch DX2’s tighter titration, two additional dosimetry options are now available.

Traditional diathermy units provide a dosimetric scale categorized by four doses:

DOSE I - Subthermal
DOSE II - Mild Heat
DOSE III - Low Heat
DOSE IV - Vigorous Heat

The unique parameters afforded by Richmar’s exclusive Scientific Dosage Control (SDC), allows for an increased thermal effect with decreased risk.

The heating effect from Dose IV can be uncomfortable due to decreased muscle mass and/or the thinness of the skin, such as with geriatric patients. To better meet the needs of these patients, SDC provides two additional increments of heating to Dose III:

DOSE III SDC M - Moderate Heat
DOSE III SDC H - High Heat

HIGH EFFICIENCY AUTO-TUNING (H.E.A.T.)

The resonant auto-tuning technology found in the TheraTouch DX2 continually adjusts to provide consistent coupling, based on calculations of the patient’s impedence, size, and body density. This ensures maximum energy transmission, without resorting to a higher dosage, resulting in faster heating and shorter treatment times.

MICROCIRCULATION INDICATION

The Microcirculation Indication is an exclusive parameter located within the TheraTouch DX2. Studies indicate that subthermal pulsed shortwave diathermy can enhance the rate of tissue healing and be an effective adjunct therapy.* This indication can be especially helpful in long term care and skilled nursing facilities.

FLEXIBLE, RELIABLE MECHANICAL ARM

Five articulation points on the arm allow for easy positioning of the inductive drum to various body areas. In addition, the numerous friction joints hold the
drum in position during treatments, preventing unwanted movement.

ORDERING DETAILS

DQSWD2: TheraTouch DX2
DQSWD2-D: Coil Monode Drum (14cm)
DQSWD2-DC: Coaxial Cable for Coil Monode Drum
DQSWD2-MA: Mechanical Arm

TECHNICAL SPECIFICATIONS

Continuous Mode Output: 100W Average Power at 50Ω
Pulsed Mode Output: 200W Peak Power at 50Ω
Power: 100-240 V ~; 50/60 Hz
Output Frequency: 27.12 MHz ± 0.6%
Power Increment Settings: .5 W
Pulse Width: 20 - 400 μsec in 20 μsec increments
Pulse Frequencies: 10 - 800 Hz in 10 Hz increments
Treatment Duration: 1 - 30 min in 1 min increments
Electrical Class: CLASS I
Electrical Type: TYPE BF
Regulatory Risk Class: IIb according to MDD 93/42/EEC